Technical information

PHONE [phone]
FAX [phone]
WEB www.cadetco.com
The Smart-Base
Electronic Programmable Baseboard Thermostat
◆
40
Carton Details
Product
DIMENSIONS
|
3.75”W x 6”H x 2.75”D
Single Retail Pack
DIMENSIONS
|
6.75”W x 9.5”H x 2.75”D
Case
DIMENSIONS
|
16”W x 7.25”H x 10.25”D
PALLET QTY.
|
58 cases
CUBE
|
.69
The Smart-Base™
FEATURES AND BENEFITS
•
Save up to 28% on your heating bill
•
5-1-1 programmable thermostat with 4 daily programs
•
Precise 2° comfort range with digital temperature sensing
•
Convenient push-button control
•
Digital display screen for easy viewing: actual room
temperature, time, day
•
Use with 208/240 Volt Cadet “F” Series electric baseboard
heaters only
•
Easy to install for new or replacement use
General Information:
Save up to 28% on your heating bill with the SMART-BASE™ electronic
programmable
thermostat, designed specifically for Cadet “F” Series electric
baseboards. Digital temperature sensing provides a precise 2° comfort
range, ensuring constant comfort. 5-1-1 programming allows you to create
a heating schedule specific to your needs, for weekdays, Saturday, and
Sunday. Convenient push button controls
make this thermostat easy to
program. The SMART-BASE™ Electronic thermostat can be installed on
either end of standard Cadet 208/240 volt baseboards and is available
only in double (4 wire) pole. Setpoint range: 41°F to 86°F (5°C to 30°C).
Architectural Information:
The SMART-BASE™ electronic thermostat shall be UL listed. Designed to
be an integral part of the Cadet “F” series baseboard. The control s
hall be
capable of switching up to 12.6 amps, of a resistive load, at 240 or 208
VAC. No minimum load requirement. Control designed to meet power
surges normally found in homes. Separate single pole double throw switch
included in control for separation of branch circuit from control and heater.
Control
shall be digital with an LCD display. After programming, LCD display
will show the actual room temper
ature, current time of day, day of week,
mode, and current status of heater. Programming of microprocessor
accomplished through the use of the three buttons on the control faceplate.
Control shall have “Auto Mode” consisting of 5-1-1 programming, four
events for Monday through Friday and four events each for Saturday
and Sunday. Control shall have a “Manual Mode” for continuous 24-hour
control of a sin
gle temperature set point. No batteries are required, as the
program will be maintained in memory for approximately ten years without
power. Only the time and day are required to be re-entered after a
power outage.
Part# Model# Description Wt./Lbs Case Qty
027418 03400 7 SBFT2W Smart-Base Thermostat Kit Retail Pack DP, White, 12.6A .75 6
027418 03405 2 SBFT2A Smart-Base Thermostat Kit Retail Pack DP, Almond, 12.6A .75 6
UPC Code
Learn more about
The Smart-Base
Scan It Now!