Technical information

PHONE [phone]
FAX [phone]
WEB www.cadetco.com
General Information:
The Hot One
®
240 volt portable heater is designed with the same rugged
construction as Cadet's commercial unit heater line. It provides warmth for
large areas that are often difficult to heat, like garages and workshops. The fan
delay mechanism, standard on all units, allows the element to heat before
blowing air, thereby eliminating cold startups. It also delays the shutdown
of the
fan after the element turns off to disperse residual heat. The Hot One
®
comes factory equipped with a bracket for either wall mount or floor stand
use (non-marking rubber pads are included on the mounting bracket). The
area must be equipped with an accessible 240 volt receptacle.
Architectural Information:
Portable fan unit heater shall be UL listed and rated at 240V. External cabinet
shall be construc
ted of 20 gauge high quality steel and shall be finished
with a baked on powder coat paint. Fan shall be aluminum blade axial flow
type, and mounted directly to the motor shaft. Motor shall be shaded pole
with ball bearings. Heating elements shall be sealed in magnesium oxide
powder and protected by metal sheathing and aluminum fins. Heater shall be
equipped with manual reset thermal cut out for over t
emperature protection.
Fan motor circuits shall be thermostatically controlled with fan delay.
Technical Information:
The Hot One
®
240 volt heater is available in 5,000 watts (3,333 low setting).
It also includes a fan switch for air circulation without heat. All units
include a built-in double pole thermostat. UL requires a 3’ minimum clearance
from front. For optimum performance Cadet recommends 6” fro
m back and
top, and 12” from sides.
Ordering Information:
Standard color for The Hot One
®
heater is red with black detail.
Recommended for elevations under 7500 feet.
The Hot One
®
30 AMP
RCP502S
Carton Details
Complete Unit Carton
DIMENSIONS
|
20.75”W x 18.75”H x 10.25”D
PALLET QTY.
|
20
CUBE
|
2.3
Receptacle/Plug
Configuration
The Hot One
®
Great for garages and shops
◆
29
SAFETY
Thermal Safeguard
- High temperature manual reset:
turns off heater if normal operating
temperatures are exceeded
QUALITY
High mass, tubular element for long life
COMFORT
• Fan delay eliminates cold draft on startup
and disperses residual heat on shutdown
• Hi/Low switch for heat output
(5000 watts / 3333 watts)
• Fan only control for air circulation
CONVENIENCE
• Built-in double pole thermostat
• Portable, great for garages and workshops
• 6 foot cord (with polarized plug) for 240V use
EASY
Bracket for wall mount or floor stand use
”
”
Clearance Requirements
Part# Model# Description 240V 208V 120V 240V 208V 120V Wt./Lbs
027418 10289 8 RCP502S Portable Unit Heater 5000 / 3333 20.8 / 13.9 31
UPC Code
AMPS HI/LOWWATTS HI/LOW
Product Dimensions:
15
3
⁄4”W x 17
1
⁄2”H x 8
1
⁄4”D
Learn more about
The Hot One
®
Scan It Now!