Technical information

General Information:
The Com-Pak Twin Plus is the ideal choice for heating large areas such as
an open foyer with a single heater. Twin heaters connected behind a single
grill provide all the benefits of The Com-Pak Plus. Cadet recommends a
wall-mounted thermostat for optimum performance, or you may prefer the
convenience of an optional built-in thermostat.
Architectural Information:
Fan forced electric
air heaters shall be UL listed, factory rated at 208V
or dual field rated 208V/240V. A painted 20 gauge wall mounting can with
four knockouts and 79 cubic inch wiring compartment shall be provided
with each complete heater. Heater shall be of unitized construction and
attach to the wall can with two screws and shall be self-contained and
completely separate from the wall mounting can. Two elements sh
all be
nichrome type wrapped on mica insulators with two oversized 16 amp at
240V high temperature manual power reset limit switches and two over
temperature thermal backup fuses. Two independent two-stage centrifugal
blowers shall be driven by impedance protected motors. The motors shall
be totally isolated from the heating chamber. Metal grill shall be of one
piece, 20 gauge construction and finished
with a powder coat paint system.
The Com-Pak Twin
Carton Details
Heater Assembly Only Carton
DIMENSIONS
|
19.75”W x 13.375”H x 7”D
PALLET QTY.
|
56
CUBE
|
1
Complete Unit Carton
DIMENSIONS
|
18.25”W x 12.5”H x 5.75”D
PALLET QTY.
|
56
CUBE
|
.91
Heater Assembly with Thermostat Wall Can
The Com-Pak Twin
The economical choice for larger areas
◆
15
SAFETY
Primary and Secondary Thermal Safeguards
- Robust, heavy duty high temperature manual
power reset
- Over temperature one-time thermal fuse
QUALITY
•
Nichrome coil element for quick heat
•
Powder coat paint process eliminates sharp
metal edges
EASY
Wall can designed for ease of installation
CONVENIENCE
Dual fans behind single grill for quick response
for larger areas
Learn more about
The Com-Pak Twin
Scan It Now!