Technical information

General Information:
The Com-Pak Plus is our most popular in-wall fan heater. An economical
choice that includes our highly regarded safety components. These heaters
are perfect for smaller areas or larger areas needing the dispersed heat
created by multiple heaters. Cadet recommends a wall-mounted thermostat
for optimum performance, or you may prefer the convenience of an optional
built-in thermostat.
T
echnical Information:
Fan heaters and thermostats work best when installed on an inside wall.
UL requires heater to be placed a minimum distance of 6” from adjacent
surfaces and 4½” from the floor. Manufacturer recommends installation
12” from all surfaces. All models 1500 watts or less may be ceiling mounted.
A 3’ minimum clearance is required for furniture or other objects placed
directly in front of
heater.
NOTE: Manufacturer recommends installing heater assembly after walls
are finished. Heater must be cleaned every six months minimum.
Architectural Information:
Fan forced electric air heaters shall be UL listed, factory rated at 120V,
208V, and dual field rated 208V/240V. A painted 20 gauge wall mounting
can with six knockouts and 34 cubic inch wiring compartment shall be
provided with each complete heater. Each complete heater shall be of
unitized construction and attach to the wall can with a single screw and
shall be self-contained and completely separate from the wall mounting can.
Element is of nichrome type wire wrapped on mica insulators with an
oversized 16 amp rating at 240V, high temperature manual power reset
limit switch and an over-temperature thermal back-up fuse. A two stage
cen
trifugal blower shall be driven by an impedance protected motor. The
motor shall be totally isolated from the heating chamber. Metal grill shall
be of one piece, 20-gauge construction and finished with a powder coat
paint system.
Ordering Information:
Suffix “T” in model number denotes built-in single pole thermostat. Model
numbers without a “T” require a thermostat. Recommended for elevations
under 10,0
00 feet. Complete unit available in white only.
The Com-Pak Plus
Heater Assembly with Thermostat Wall Can
Carton Details
Heater Assembly Only Carton
DIMENSIONS
|
12”W x 7.5”H x 5.25”D
PALLET QTY.
|
100
CUBE
|
.27
Complete Unit Carton
DIMENSIONS
|
14.375”W x 9.375”H x 5.75”D
PALLET QTY.
|
96
CUBE
|
.45
The Com-Pak Plus
The economical choice for smaller areas
◆
13
SAFETY
Primary and Secondary Thermal Safeguards
- Robust, heavy duty high temperature manual
power reset
- Over temperature one-time thermal fuse
QUALITY
•
Nichrome coil element for quick heat
•
Powder coat paint process eliminates sharp
metal edges
EASY
Wall can designed for ease of installation
CONVENIENCE
•
Horizontal or vertical grill mounting options
•
With or without built-in thermostat
Learn more about
The Com-Pak Plus
Scan It Now!