Specification

SoftHEAt
Gentle, fluid heat for the
people you love most
• Smart design helps reduce the
effect of indoor allergens
• Lowest surface temperatures
available—perfect for homes
with kids and pets
• Hydronic heat uses
environmentally friendly fluid
• Sleep soundly, thanks to
silent operation
• Install easily, with no
plumbing or refill required
• Spreads residual heat even
after thermostat turns off
• Includes high-temperature
safety shutoff feature
• Powder coated for a smooth,
durable finish
cadetheat.com
855.CADET.US
Vancouver, Washington
USA
m
a
d
e
i
n
t
h
e
Ideal for bedrooms or nurseries, SoftHEAT wraps
your family in gentle, steady warmth that fills the room.
Enjoy greater comfort with a more consistent room
temperature and a soft gentler heat with our
hydronic design.
ARCHITECTURAL - ENGINEERING INFORMATION
Cadet heaters are constructed of 22 gauge steel and powder coated
for maximum durability. The heater has a standard left hand wire
junction box and a special order for a right hand wire junction box.
Heater has a high temperature capillary thermal over load device that
extend over the length of the heating element. Heater element
construction is constructed of .875 inch diameter copper tubing and
2.375 inches x 2.375 inches aluminum fins mechanically bonded to the
copper tube. Heating element is filled with a non-toxic engineered heat
transfer fluid for maximum efficiency and thermal storage.
TECHNICAL INFORMATION
Heater is constructed of 22 gauge steel for durability and powder coated
for a quality finish. Baseboard heaters work best when placed under a
window and at least 12 inches from furniture or other objects. Keep at
least 12 inches minimum from objects hanging above (i.e., drapes).
Do not install below electrical outlets. Heater may be placed directly
on the floor and mounted to the wall.
All models require hard-wire installation (no cord or plug).