Specification Sheet
• Eliminate temperature swings with precise
digital temperature sensing
• On-screen indicator shows when heater is
operating
• Controls up to 3,600 watts at 240 volts,
3,120 watts at 208 volts, or 2,000 watts at
120 volts
• Ideal performance for electric wall heaters
• Comfort range: 1 degree
The TH114 gives you precise temperature control. Its
slim design, easy-to-read large backlit display, and
straightforward non-programmable controls make it
simple to use.
ARCHITECTURAL - ENGINEERING INFORMATION
Electronic thermostat is UL and CSA listed. Line voltage
temperature control shall have LCD indication of status of heater.
The control shall be capable of switching loads of 15 amps at
240 or 208 volts, or 16.7 amps at 120 volts. Unit shall include
microprocessor-optimized proportional integral adaptive (PIA)
thermistor for temperature control. Vented housing shall be
white and made of ame retardant high impact plastic with two
mounting screws provided. On/Standby switch for quick shutdown
provides energy savings and added safety for vacant rooms. No
batteries shall be required for operation.
TECHNICAL INFORMATION
Set point range: 40°F to 86°F (5°C to 30°C)
4 wire installation
Heating cycle length 15 minutes. All settings are saved during a
power outage.
15 amps maximum load (240/208 volt) or 16.7 amps maximum
load (120 volt)
cadetheat.com
855.CADET.US
Vancouver, Washington
UPC/PART MODEL DESCRIPTION VOLTS AMPS
027418 08162 9 TH114-A-240D-B Electronic, non-programmable, double pole, white 240/208 15
027418 08152 0 TH114-A-120S Electronic, non-programmable, single pole, white 120 16.7
Product Dimensions:
2-3/4"W x 5"H x 1-5/8"D
Q2 2016
TH114
Non-programmable,
electronic control