User manual

10
The grill must be tested outdoors in a well-ventilated area, away from ignition sources such as gas fired
or electrical appliances. During leak test, keep grill away from open flames or sparks.
Use a clean paintbrush and a 50/50 mild soap and water solution. Brush soapy solution onto areas
indicated by arrows in figure below.
Connecting Regulator to the LP Tank
1. LP tank must be properly secured onto grill.
2. Turn all control knobs, including side burner to the
OFF position.
3. Turn LP tank OFF by turning hand-wheel clockwise
to a stop.
4. Remove the protective cap from LP tank valve.
Always use cap and strap supplied with valve.
If growing bubbles appear,
DO NOT
use or move the LP tank. Contact an
LP gas supplier or your fire depart-
ment.
WARNING
! !
CAUTION
! !
DANGER
! !
DO NOT use chemical household
cleaning agents. Damage to gas train
components can result.
WARNING
! !
CAUTION
! !
DANGER
! !