Manualshelf

Installation Guide

ManualsBrandscadeninc ManualsDrop-in Kitchen Sinks16 Gauge Stainless Steel 30 in. 5-Hole Single Bowl Drop_In Waterfall Kitchen Sink Set with Faucet and Accessories
12
Table Of Contents
Installation Instructions
For Topmount Sink
Please carefully read complete instructions before beginning installation. these instructions are for installation with solid surface,
composite material countertops. sink recommends professional countertop installers and is not responsible for damage to the
countertop or sink during installation.
Countertop
Topmount sink
Unpack the new sink and check the contents of the
materials supplied : Sink ,Mounting brackets, and Cutout
template (depending on model).
Check the cut out template is the same as bowl inner
size.A. Flush mount: Sink edge is flush with countertop
opening.
Cut inside of ling
Counter Top
Cut out area
Cut out the appropriate template for your sink model and
desired installation option.Place template in desired
position on countertop , locating center of the bowl over
cabinetand faucetholes.
Trace the line of the template and cut countertop
according to templated size. using appropriate cutting
tools. Template is for guide only. Use physical sink to ensure
accurate cutout opening.
Verify that the sink fits perfectly. The lip to the sink should be
resting on the countertop.
Make proper water and waste pope connections.
Topmount sink
Screw
Countertop
Cut out the appropriate template for your sink model and
desired installation option.Place template in desired
position on countertop , locating center of the bowl over
cabinetand faucetholes.
Trace the line of the template and cut countertop
according to templated size. using appropriate cutting
tools. Template is for guide only. Use physical sink to ensure
accurate cutout opening.
1
2
3 4 5

Summary of content (2 pages)