Installation Guide

Prepare the required
accessories
Pass the top part of
drain through the
drain hole
Align the sink with the
drain hole and set it
up
Put the rubber washer
on the drain pipe and
tighten the nut(under
countertop )
Prepare bottom
parts of drain
Contact two parts of
the drain and tighten
Finished
contact hot- cold
waterlines and tighten
Put O-ring to the
position as shown
Drill the 1/4 screw
in
Pass two waterlines
through faucet hole of
countertop & adjust
faucet
Put U-rubber
pad on
Put U-metal
piece on
P
ut nuts on
& tighten nuts
Finished
The overall effect The overall effect
U-metal piece x1
U-Rubber pad x1
O-ring x1
screw x2
PTFE tape x1
faucet x1
bottom part drain x1upper part drain x1
plastic washer x2
basin x 1
Sink Installation Instruction
Installation Instruction
Faucet
Put the mounting Ring
on
the countertop
(with plastic washer)
Mounting Ring
x1
hot -cold waterlines x2
adapter 1/2 to 3/8 x 2 adapter 1/2 to 9/16 x 2
Partslist