Instructions / Assembly

ManualsBrandscadeninc ManualsFreestanding Shelving Units5-Tier Adjustable Metal Wire Garage Storage Shelving Unit in Chrome with Wheels (60 in. W x 82 in. H x 24 in. D)

ASSEMBLY INSTRUCTIONS

5-Tier Wire Shelving Rack

Warning:

Maximum weight capacity per shelf is

1500lbs when equally distributed on

feet levelers.

Maximum entire unit weight capacity is

600lbs when equally distributed on casters.

Failure to follow these instructions may

result in serious injury or death of

yourself and people around you.

Some of the part are heavy and/or has

shape edge, please install it carefully to

avoid hurt you and people around you.

Caution:

Do not stand on or climb on the shelving unit.

Place heavier items on lower shelves

and lighter ones on top shelves.

5TWL2460

3. Turn assembly upright and push the shelf (A) firmly onto

the tapered locks (B). Note: Make sure the lip of shelf (A)

is facing down and the levelers (F) on bottom poles (D)

are on the floor.

4. Repeat steps 1-3 for the second shelf (A).

2. Rest shelf (A) on its side, then insert the bottom poles (D)

through the corner holes of the shelf (A).

1.With the tapered end facing up, snap the two halves of a

tapered lock (B) at the desired height on bottom pole (D).

Repeat for the remaining bottom poles (D), making sure

the tapered locks (B) are installed at the same grooved

line on each bottom pole (D).

5. Screw top pole (C) onto bottom pole(D), hand tighten.

MOBILE

STATIONARY

Attention: The wheel (E) must be fully screwed

to the botton pole (D) by wrench

Attention：The tapered must be fixed to the

groove on the pole, and make sure the tapered

does not slip before installing the shelf

PACKAGE CONTENTS Attention:Please install it with 2 people !

6-1 Repeat steps 2-4 for the remaining shelves (A).

Refer to image 6-1 for the assembled unit of stationary option.

6-2. Repeat steps 2-4 for the remaining shelves (A).

Refer to image 6-2 for the assembled unit of mobile option.

7.Place the pp spacer on top of the shelf。Finish.

Shelfx 5

x 40 +2 extra

Wheel

(2 locking, 2 non-locking)

(for mobile option)

x 4

Feet Leveler

(for stationary option)

x 4

x4 Bottom

Pole(with threaded insert preassembled)

x 4 Top Pole

(with pole cap and pole connector preassembled)

x 16

Black plastic spacer

(NOTE: Discard the black plastic spacers I.

These between each shelf are only for packing

purpose , not for assembling.)

Shelf liner

x 5

Summary of content (1 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS 5-Tier Wire Shelving Rack 1.With the tapered end facing up, snap the two halves of a tapered lock (B) at the desired height on bottom pole (D). Repeat for the remaining bottom poles (D), making sure the tapered locks (B) are installed at the same grooved line on each bottom pole (D). 5TWL2460 D Warning: D B Maximum weight capacity per shelf is 1500lbs when equally distributed on feet levelers. Maximum entire unit weight capacity is 600lbs when equally distributed on casters.