Specification

26
1. If the cable is damaged or needs replacing, this should be
done by an after-sales technician using the proper tools, so as
to avoid any accidents.
2. If the appliance is being connected directly to the mains
supply, an omnipolar circuit breaker must be installed with
a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical
connection has been made and that it complies with safety
regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by
a properly qualified person.
DISPOSAL: Do not
dispose this product
as unsorted municipal
waste. Collection of
such waste separately
for special treatment is
necessary.
This appliance is labeled in compliance with
European directive 2012/19/EU for Waste Electrical
and Electronic Equipment (WEEE). By ensuring that
this appliance is disposed of correctly, you will help
prevent any possible damage to the environment
and to human health, which might otherwise be
caused if it were disposed of in the
wrong way.
The symbol on the product indicates that it may not
be treated as normal household waste. It should be
taken to a collection point for the recycling of
electrical and electronic goods.
This appliance requires specialist waste disposal. For
further information regarding the treatment, recover
and recycling of this product please contact your
local council, your household waste disposal service,
or the shop where you purchased it.
For more detailed information about treatment,
recovery and recycling of this product, please contact
your local city office, your household waste disposal
service or the shop where you purchased the
product