Specification

16
4. Touching the heating zone selection control, and then
touch the “Timer”, the timer is cancelled, and the“--” will
show in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6.When cooking timer expires, the corresponding cooking
zone will be switch off automatically and show “H”.
Setting the timer to turn more than one
cooking zone off
1. If more than one heating zone use this function, the timer
indicator will show the lowest time.
(e.g. zone 1# setting time of 6 minutes, zone 2# setting
time of 3 minutes, the timer indicator shows “3”.)
NOTE: The flashing red dot next to power level indicator
means the timer indicator is showing time of the heating
zone.
If you want to check the set time of other heating zone,
touch the heating zone selection control. The timer will
indicate its set time.