Specifications

- 34 -
AS/CA S002:2010 COPYRIGHT
OCTOBER 2010
5.7.2.2 The RVA should identify the Party B ACTE and should include a
message similar to the following example:
‘The number you have called is unattended at present and your call
is being directed to another number. Please wait for normal service
tones.’
5.7.2.3 The ACTE should commence dialling the Party C as soon as the
transmission of the RVA is commenced.
5.7.2.4 Interconnection of the speech paths between the A-B and B-C
parties should be made immediately the three preceding steps
have been completed, so that the ring tone or other service tone
associated with Party C will be heard by Party A.
5.7.3 Multiple calling option
ACTE may be designed to make one attempt to direct a call to a
single telephone number or to automatically make multiple
attempts to establish a call if the original attempt is found to be
unsuccessful. Multiple attempts may be directed to a single
telephone number or to multiple telephone numbers. Any multiple
calling facilities of the ACTE should operate in the manner described
in Automatic Operation section of this Standard.
Compliance with Clause 5.7.3 should be checked by inspection and
measurement as appropriate.
5.8 Technical conditions for recording of telephone
conversations
5.8.1 General
The requirements in Clauses 5.8.2 to 5.8.6 (inclusive) apply to CE,
including CSS, capable of or designed for recording telephone
conversations.
5.8.2 Tone transmission while recording
CE should transmit a tone in accordance with Clause 5.8.6(b) to the
line while the telephone conversation is being recorded.
5.8.3 Incorporation of interlocking circuitry
Interlocking circuitry should be incorporated to ensure that
whenever the recorder is in a recording mode, the recording tone
generator should send warning tones to the line.
5.8.4 Continuity of tone generation
The recording tone generator should not be capable of being
disabled while a conversation is being recorded.
5.8.5 Use of common power supply
The recording tone generator and the recording device should be
powered from a common power supply and should incorporate as