Specifications

- ii -
AS/CA S002:2010 COPYRIGHT
OCTOBER 2010
Standards revision
Australian Standards (AS/ACIF and AS/CA Standards) developed by the
Communications Alliance are updated according to the needs of the industry, by
amendments or revision. Users of these Standards should make sure that they
possess the latest amendments or editions. Representations concerning the need
for a change to this AS/CA Standard should be addressed to—
The Project Manager
Customer Equipment and Cable Reference Panel
Communications Alliance
PO Box 444
Milsons Point NSW 1565
Regulatory notice
This document will be submitted to the ACMA, for making as a technical standard
under s376 of the Telecommunications Act 1997. Until it is made by the ACMA
compliance with this Standard is voluntary.
The Standard as made by the ACMA will commence on the day after it
registered under the Legislative Instruments Act 2003 (LIA) and it will be a
disallowable instrument within the meaning of s46A of the Acts Interpretation Act
1901.
The ACMA is a Commonwealth authority with statutory powers to impose
requirements concerning telecommunications Customer Equipment and
Customer Cabling.
The ACMA requires Australian manufacturers and importers, or their Australian
agents, of specified items of Customer Equipment and Customer Cabling to
establish compliance with Standards such as this. Items are required to be
labelled in accordance with the applicable labelling notices.
Details on current compliance arrangements can be obtained from the ACMA
website at http://www.acma.gov.au or by contacting the ACMA below at:
Australian Communications and Media Authority
PO Box 13112
Law Courts PO
Melbourne VIC 8010
Australia
Telephone: [phone]
Facsimile: [phone]
TTY: [phone]