Installation guide
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover
• Fully Adjustable +12dB Bass Equalizer
• 2 Ohm Stable Stereo
• 4 Ohm Mono Bridgeable
• High Level Inputs
• Smart Turn On Circuit
• Full IC-Controlled Protection Circuit
• LP / FR / HP Crossover Mode Switch
• 9 Volt Pre-Amp Circuit
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover
Low Pass 50Hz - 500Hz
High Pass 50Hz - 150Hz
• Fully Adjustable +12dB Bass Equalizer
• 2 Ohm Stable Stereo
• 4 Ohm Mono Bridgeable
• 4 Channel Mixed-Mono Capable
• High Level Inputs
• Smart Turn On Circuit
• Full IC-Controlled Protection Circuit
• 2 CH / 4 CH Input Mode Switch
• Clone Function
• 9 Volt Pre-Amp Circuit
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover
Low Pass 50Hz - 500Hz
High Pass 50Hz - 150Hz
• Fully Adjustable +12dB Bass Equalizer
• 2 Ohm Stable Stereo
• 4 Ohm Mono Bridgeable
• 4 Channel Mixed-Mono Capable
• High Level Inputs
• Smart Turn On Circuit
• Full IC-Controlled Protection Circuit
• 2 CH / 4 CH Input Mode Switch
• Clone Function
• 9 Volt Pre-Amp Circuit
Q4000
• Rated Power: 125 Watts RMS @ 4 ohm x 4
• Rated Power: 190 Watts RMS @ 2 ohm x 4
• 2 x 380 Watts RMS @ 4 ohm Mono Bridged
• Minimum THD at Rated Power: < 0.1%
• Frequency Response: 10Hz - 40KHz
• S / N Ratio: > 97dB
• Damping Factor: > 150 @ 100Hz
• Dimensions: ( W x H x L ) 7.9” x 2.4” x 16.9”
24
Q5000
• Rated Power: 80 Watts RMS @ 4 ohm x 4 + 250 Watts x 1
• Rated Power: 120 Watts RMS @ 2 ohm x 2 + 250 Watts x 1
• 1 x 400 Watts RMS @ 2 ohm mono
• Minimum THD at Rated Power: < 0.05%
• Frequency Response: 10Hz - 40KHz
• S / N Ratio: > 97dB
• Damping Factor: > 114 @ 100Hz
• Dimensions: ( W x H x L ) 7.9” x 2.4” x 18”
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover
Low Pass 50Hz - 4KHz
High Pass 150Hz - 4KHz
• Fully Adjustable Bass Equalization Control
• 2 Ohm Stable Stereo
• 4 Ohm Mono Bridgeable
• 3 Channel Mixed-Mono Capable
• Channel 5 - 2 Ohm Mono Capable
• High Level Inputs
• Smart Turn On Circuit
• Full IC-Controlled Protection Circuitry
• 2 CH / 4 CH / 5 CH Input Mode Selector
• 9 Volt Pre-Amp Circuit
Q3000
• Rated Power: 90 Watts RMS @ 4 ohm x 4
• Rated Power: 135 Watts RMS @ 2 ohm x 4
• 2 x 270 Watts RMS @ 4 ohm Mono Bridged
• Minimum THD at Rated Power: < 0.1%
• Frequency Response: 10Hz - 40KHz
• S / N Ratio: > 97dB
• Damping Factor: > 198 @ 100Hz
• Dimensions: ( W x H x L ) 7.9” x 2.4” x 14.9”
Q2000
• Rated Power: 90 Watts RMS @ 4 ohm x 2
• Rated Power: 135 Watts RMS @ 2 ohm x 2
• 1 x 270 Watts RMS @ 4 ohm Mono Bridged
• Minimum THD at Rated Power: < 0.1%
• Frequency Response: 10Hz - 40KHz
• S / N Ratio: > 97dB
• Damping Factor: > 114 @ 100Hz
• Dimensions: ( W x H x L ) 7.9” x 2.4” x 12.1”
Specications