Specifications

48 IBM Voice Over Frame Relay Perform Guide
• SET TONE DTMF: Specifies the characteristics of the dual-tone multi frequency
(DTMF) signal.
•
SET TONE FAST BUSY: Specifies the characteristics of up to two frequencies
used to generate the fast busy signal.
•
SET TONE RING-BACK: Specifies the characteristics of up to two frequencies used
to generate the ring-back signal.
•
SET TONE WARBLE: Specifies the characteristics of up to two frequencies used to
generate the warble signal.
Voice Config>SET TONE DIAL
On1 (0 to 32767 ms) [0]?
Off1 (0 to 32767 ms) [0]?
On2 (0 to 32767 ms) [0]?
Off2 (0 to 32767 ms) [0]?
Freq1 (300 to 3000 Hz) [350]?
Freq2 (300 to 3000 Hz) [440]?
Level1 (-7 to -22 dB) [-16]?
Level2 (-7 to -22 dB) [-16]?
Voice Config>SET TONE DTMF
On1 (0 to 32767 ms) [100]?
Off1 (0 to 32767 ms) [100]?
Level (-7 to -22 dB) [-7]?
Voice Config>SET TONE FAST-BUSY
On1 (0 to 32767 ms) [300]?
Off1 (0 to 32767 ms) [300]?
On2 (0 to 32767 ms) [300]?
Off2 (0 to 32767 ms) [300]?
Freq1 (300 to 3000 Hz) [480]?
Freq2 (300 to 3000 Hz) [620]?
Level1 (-7 to -22 dB) [-16]?
Level2 (-7 to -22 dB) [-16]?
Voice Config>SET TONE RING-BACK
On1 (0 to 32767 ms) [2000]?
Off1 (0 to 32767 ms) [4000]?
On2 (0 to 32767 ms) [2000]?
Off2 (0 to 32767 ms) [4000]?
Freq1 (300 to 3000 Hz) [440]?
Freq2 (300 to 3000 Hz) [480]?
Level1 (-7 to -22 dB) [-22]?
Level2 (-7 to -22 dB) [-22]?