Specifications

222 IBM Voice Over Frame Relay Perform Guide
LMI Mode Format:framdplmmm
Sets the local management interface mode (m) of
frame relay port dp. Mode: u (user) or n (network).
Frame relay port dp must be offline.
LMI Timeout Format:framdplmtip
Sets the timeout period (p) in seconds after which, if
no response is received from a poll, a poll failure is
declared. Timeout period: 5-15-30 seconds. Frame
relay port dp must be offline.
LMI Type Format:framdplmtyp
Sets the local management interface protocol type
(p). Protocol type: n (none), r (Rev1.0), a (A-Annex),
or d (D-Annex). Port must be offline.
Local Command
Local Format
: local
Sets an IBM 9783 unit to local command mode to
direct command strings to the local unit (see
Remote). Command prompt will be LOCAL>.
Password (p) Command
C
hange Format: p c mode <ENTER>
Changes the password for the specified mode
(SYSTEM, IP_LOADER, or TELNET). When
SYSTEM is specified, level-1 and/or level-2 access
protection is available. After typing p c and pressing
the Enter key, the unit prompts you for level 1 or
level 2. Level 1 provides access to all commands.
Level 2 provides access to Local, Quit, Remote, and
Show commands only. Level-1 access is required to
change the level-1 password; level-2 access is
required to change the level-2 password. Password
can contain up to 30 alphanumeric characters.
Default = Enter key_
Remote Format: p r password
Sends a password to a remote node to log in to a
remote console session. The remote unit is the unit
most recently selected with the
Select_remote_node (se) command. Password can
contain up to 30 alphanumeric characters.
Quit (Q) Command