Specifications

Command Summary 205
F
ast_busy Format: ca f s1_on s1_off s2_on s2_off f1 f2 l1 l2
Configures two signals that are used to generate
fast busy. Enter:
1. Signal 1 on-time (s1_on). Range: 0-300-32767
msec.
2. Signal 1 off-time (s1_off). Range: 0-300-32767
msec.
3. Signal 2 on-time (s2_on). Range: 0-300-32767
msec.
4. Signal 2 off-time (s2_off). Range: 0-300-32767
msec.
5. Signal 1 frequency (f1). Range: 0-480-3000
msec.
6. Signal 2 frequency (f2). Range: 0-620-3000
msec.
7. Signal 1 level (l1). Range: (-40)-(-16)-(-13) dB in
0.5-dB increments.
8. Signal 2 level (l2). Range: (-40)-(-16)-(-13) dB in
0.5-dB increments. Cycle voice ports offline and
back online.
Glare_delay Format:cagd
Sets delay (d) to allow for glare detection before a
port can seize a channel. Range: 0- 500-10000
msec. Cycle voice ports offline and back online to
complete the update.
Inter_dig_t/o Format:cait
Sets interdigit timeout (t) that terminates digit
collection process after first digit is collected.
Range: 0-2500-10000 msec. Cycle voice ports
offline and back online to complete the update.
Match_rule Format:camar(stringord)
Enter the match rule number (r) followed by the
match rule string or d (delete match rule r). Match
rule number: 0-114.
MF Format:camfonofflvl
Sets the cadence and gain for the MF signal. Enter
the ontime (on) and the offtime (off) followed by the
level (lvl). Ontime and offtime: 0-100-32767 msec.
(In normal situations, this value should not be less
than 40). Level: (-7) to (-25) dBm in 0.5 increments.