Specifications

142 IBM Voice Over Frame Relay Perform Guide

Step 5: The Call Processing Rule for voice ports 5 and 6.

The configuration of 2212 Kobe is not given here but you can follow the same

steps given for the 2212 Yokohama configuration. Just make sure you change the

local number, location number, etc., according to Kobe. Only one voice port is

required in the Kobe router, so don’t configure the other voice port, that is port 6.

2212-YOKOHAMA Voice Config>ADD CALL-PROCESSING-RULE 5

Define Call Processing Rule #1

Destination Type (Local or Remote) [Remote]? local

Dial Digit Matching Rule Number (0 to 2) [0]? 1

Network Output Rule Number (0 to 2) [0]? 1

2212-YOKOHAMA Voice Config>ADD CALL-PROCESSING-RULE 5

Define Call Processing Rule #2

Destination Type (Local or Remote) [Remote]?

Call Processing DLCI (16 to 1007) [16]?

Payload DLCI (16 to 1007) [16]?

Call Processing Subchannel (4 to 254) [4]?

Payload Subchannel (4 to 254) [4]? 5

Dial Digit Matching Rule Number (0 to 2) [0]? 2

Network Output Rule Number (0 to 2) [0]? 2

2212-YOKOHAMA Voice Config>ADD CALL-PROCESSING-RULE 6