User Guide

Chapter 3 Using the Schematic Editor
58
Text Grid
Text Grid allows you to set the grid spacing for text
separately from the drawing grid spacing. The text grid is
usually set to some smaller percentage of the drawing
grid. This allows you to align text between drawing grid
points.
Enabling text grid and specifying text grid size
1 From the Options menu, select Display Options.
2 In the Text Grid frame, select the Stay-on-Grid check
box to enable the text grid.
3 In the Grid Size text box, type the text grid spacing
value.
4 Click OK.
Setting the Autosave Interval
The autosave interval specifies the time interval, in
minutes, which PSpice Schematics automatically saves
any modified schematics or libraries.
Setting the Autosave interval
1 From the Options menu, select Editor Configuration
to display the Editor Configuration dialog box.
2 In the Autosave interval box, type the number of
minutes for the autosave interval.
3 Click OK.