User Guide

Example—Drawing a Schematic
15
Moving Parts, Wires, and Text
Move parts, wires, buses, and text by clicking to select
them, and dragging them to a new location. To maintain
connectivity when moving parts, wires, or buses, enable
the rubberbanding option.
Moving resistor R1 up one grid
1 Click the resistor to select it.
2 Drag the resistor up one grid.
3 Place the resistor at the new location.
Part values, reference designators, and other text can be
moved in the same way.
Moving the value of R10
1 Click the 100k value of the resistor.
The box outline around the value indicates that it is
selected.
The box outline around the resistor shows that the
resistor is the owner of the selected value.
2 Drag the value of the resistor to a new location.
The box representing the 100k value follows as you
move the pointer.
For in
f
ormation on
h
ow to ena
bl
e t
h
e
rubberbanding option, see
Rubberbanding
on page 4-111.
Th
e co
l
or o
f
t
h
e se
l
ecte
d
resistor is t
h
e co
l
or
specified for the Selection display layer in
the Display Preferences dialog box (see
Configuring Colors
on
page 3-63).