User Guide

Overview
319
TEMPLATE The recipe for creating a netlist entry for simulation. The pin
names specified in the
TEMPLATE must match the pin names on
the symbol. The number and order of the pins listed in the
TEMPLATE must match those appropriate for the associated
.model or .subckt definition referenced for simulation. The
TEMPLATE attribute is only changeable in the symbol editor.
135
Notes:
1 These attributes are not changeable within the schematic editor. These are the attributes
marked by an asterisk in the Edit Attributes dialog.
2 These attributes pertain to packaging and board layout.
3 These attributes pertain to PSpice.
4 These attributes are automatically provided by PSpice Schematics when a part is placed in
the schematic editor.
5 These attributes must be provided by the user when creating or modifying a symbol in the
symbol editor.
Table 1 Reserved Attributes (continued)
Attribute Description See Notes