User Guide

Example—Drawing a Schematic
13
Labeling the wires connected to the bus
You can use Auto-Naming to label a uniform collection of
wires.
1 From the Options menu, select Auto-Naming to
display the Auto Naming dialog box.
a In the Wire/Port Labels frame, select the Enable
Auto-Increment check box.
b In the Label Template text box, type
DB1, which is
the label for the first wire in the series.
Wires will be labeled incrementally from DB1 and
up.
c Click OK.
2 Select the first (lower-most) wire to be labeled.
3 Press C+E to label the wire.
4 Repeat steps 2 and 3 for each wire segment, in the
order they are to be labeled (from bottom to top).
Note Eac
h
wire connecting to a
b
us must
be labeled with the name of one of the
signals on the bus.