User Guide
Chapter 8 Preparing Your Design for Simulation
264
Note The LVS netlist is written in general syntax and should be
compatible with most LVS tools. Depending on the tool you intend
to use, however, you may need to modify the file in particular ways
in order for it to be usable with your specific system.
Specifying alternate netlist templates
To specify an alternate netlist template
1 From the Options menu, choose Netlist Setting.
The Netlist Setting dialog box appears.
2 Under the Netlist Format frame, click the Hierarchical
radio button to enable it.
3 In the Use Template list box, select the name of the
template you wish to use.
By default, the netlister will use the PSPICETEMPLATE.
Alternate templates in the Use Template list box will be
processed in the order in which they appear. The ordering
of the templates is therefore important to the netlister and
determines what the output will be.