User Guide

Adding and Defining Stimulus
263
3 If you want the .PARAM commands to be made global
in scope, check the Make .PARAM Commands Global
checkbox. If this is disabled, the param symbols will
be local to the subcircuit in which they occur.
4 Click OK.
Note To save the current settings and make them become the default
settings for use later, click the Save as Default button.
Creating an LVS netlist {bmct NEW.BMP}
To create an LVS netlist
1 From the Tools menu, choose Create LVS Netlist.
Note The LVS netlist is, by definition, a hierarchical netlist. Therefore, it
is not necessary to enable the Hierarchical format option in the
Netlist Setting dialog box. The LVS netlist will be generated as a
hierarchical netlist regardless of the format setting.