User Guide

Chapter 8 Preparing Your Design for Simulation
258
Editing Simulation Models from
PSpice Schematics
You can define and edit simulation models directly from
PSpice Schematics.
Models can be defined using the Parts utility or the text
editor (sometimes called the Model Editor).
The Parts utility is useful for characterizing specific
models from data sheet curves. The text editor is useful if
model parameters are already defined (for example,
models from a vendor) or if the model is not supported by
the Parts utility.
Refer to the Using the Parts Utility and Using the Model
Editor (Text Editor) sections of the Creating Models chapter
in your PSpice user’s guide.