User Guide

Preparing Your Design for
Simulation
8
Overview
This chapter provides guidelines for preparing your
schematic for simulation and references further
information contained in your PSpice user’s guide.
A design that is targeted for simulation will have:
• parts that there are simulation models available and
configured for (Refer to Linking a Symbol to a Model or
Subcircuit Definition in your PSpice user’s guide.)
• sources of stimulus to the circuit (Refer to Minimum
circuit design requirements tables in the list of tables in
your PSpice user’s guide.)
In this chapter you will find the following sections:
Creating Designs for Simulation and Board Layout
on
page 8-255.
Specifying Simulation Model Libraries
on page 8-257.
Editing Simulation Models from PSpice Schematics
on
page 8-258.