User Guide

Example—Drawing a Schematic
7
Checking Symbol Libraries Configuration
When you installed Schematics, you selected a set of
libraries to be installed. These are global libraries, which
means the symbols contained in them are available to be
used in any new or existing schematic.
Check to see that you have the correct symbol libraries
configured for this example:
1 From the Options menu, select Editor Configuration.
2 Check that the following libraries are included in the
Libraries list box:
7400 [.slb,.plb]
analog [.slb,.plb]
opto [.slb,.plb]
port [.slb]
1_SHOT [.slb]
Note I
f
you are using t
h
e eva
l
uation
version of Schematics, you will be using
“eval.slb”.