User Guide

ExampleCreating a Hierarchical Design
245
Placing the voltage source
1 Click the Get New Part button to display the Part
Browser dialog box.
2 Enter
VSRC in the Part field.
3 Click Place & Close.
4 Move the part symbol to the desired location and click
to place the symbol.
5 Right-click to stop placing parts.
Creating the block representing the CMOS inverter
1 Click the Draw Block button to change the pointer to a
rectangle.
The rectangle represents the block to be drawn.
2 Press C+R to rotate the rectangle.
3 Move the pointer to the desired location and click to
place the block symbol.
4 Right-click to stop placing blocks.
5 Double-click the HB1 reference designator to display
the Edit Reference Designator dialog box.
Note One o
f
two Part Browser
d
ia
l
og
boxes may appear: the Part Browser
Advanced and the Part Browser Basic. The
advanced browser contains many features
that you dont need to use for this example.
If the Part Browser Advanced dialog box
appears, click <<Basic to display the Part
Browser Basic dialog box.