User Guide

Example—Creating Symbols from Scratch
223
Configuring the Models
The diode bridge symbol is now ready for use in PSpice
Schematics, but the model library must also be configured
if the design is going to be simulated.
1 From the Analysis menu, select Library and Include
Files.
2 If the required library is not already in the Library
section, click Browse.
3 Locate the library and click Open to put the library
with its path in the File Name field.
4 Select either Add Library* or Add Library.
The ‘*’ causes the file to be added as a global library. A
global library will be available to every schematic until
it is removed from the list. Local libraries are available
only to the active design, but can be added to another,
or made global if needed in the future.