User Guide

Chapter 1 Getting Started
4
Example—Drawing a Schematic
The following example demonstrates the basic drawing
features for drawing a schematic. It shows you how to:
• start the schematic editor and begin a new design.
• find out which libraries are configured for Schematics.
• place parts on a schematic.
• connect the part using wires and buses.
• label wires and buses.
• change reference designators and part values.
• move parts, wires and text.
• use ports on a schematic.
• place power and ground symbols on a schematic.
• save your design.
Follow this example to create the circuit shown in
Figure 2.