User Guide

Specifying Part Packaging Information
207
Any changes you make to a pin assignment are not in
effect until you select Save Assignment. If you make a
change to a pin and then select another pin from the
list without saving, the changes are not implemented.
7 When you are finished editing pins, click OK.
8 In the Package Definition dialog box, click OK.
Specifying Information for Multi-gate Components
Defining the number of gates and their gate names
1 From the Packaging menu, select Edit to display the
Package Definition dialog box (see 6-205
).
2 Click Edit Gate Types to display the Edit Gate Types
dialog box.
Parts that have the same gates have only one type of
gate (gate 1 by default). By defining the names of each
gate, you also define the number of gates.
3 Select the entry in the list labeled 1.
4 In the Gates text box, type the names of the gates
separated by commas (for example, A,B,C,D).
5 Click Change.
6 Click OK.
7 In the Package Definition dialog box, click OK.