User Guide

Creating and Editing Multi-sheet Designs
137
Copying a page
1 From the Navigate menu, select Copy Page to display
the Copy Page dialog box.
2 Select the schematic file from the Directory list.
3 Select a page number, if the page to be copied is part
of a multi-page schematic.
4 Click OK to add the page to the current schematic after
the current page and renumber all further pages.
Creating Connections Between Pages
Use off-page ports to create connections between pages.
Off-page ports can either be labeled or unlabeled. If an
off-page port is unlabeled, it must be connected to a
labeled wire or bus.
Connecting a signal between pages
1 Place an off-page port (OFFPAGE) on one schematic
page.
2 Connect a labeled wire or a bus signal to the off-page
port.
3 Repeat steps 1 and 2, using the same signal name, on
the other schematic pages.
Navigate Menu