User Guide

Placing and Editing Parts
95
11 Type a name in the File Name text box.
12 Click Save.
You are prompted to add the library to the list of
configured libraries.
13 Click Yes.
Repeating Part Placements
If you are placing parts in line with each other and evenly
spaced, use the Auto-Repeat function.
Automatically repeating part placements
Before selecting the part for placement, enable the
Auto-Repeat function and set the offset spacing.
1 From the Options menu, select Auto-Repeat to display
the Auto-Repeat dialog box.
2 Select the Enable Auto-Repeat check box.
3 Specify a horizontal and vertical offset for the part
placements.
Figure 4 illustrates parts that are placed at various
vertical and horizontal offsets.
By default, the Enable Auto-Repeat check
box is disabled, the Horizontal Offset
spacing is set to 00.00, and the Vertical
Offset is set to 00.10.