User Guide

Chapter 4 Creating and Editing Designs
86
Rotating and Flipping Parts
In PSpice Schematics, you can rotate and flip (mirror)
parts or entire areas of a schematic. A rotated part is
rotated 90° counter-clockwise. A flipped part is mirrored
about the Y axis.
Rotating and flipping can occur during one of the
following:
• while dragging (before placement)
• after placement
Rotating Parts
Rotating a part before placing it
1 Select a part to be placed.
2 Press C+R to rotate it while still in the drag mode.
The image rotates 90° counter-clockwise. Each time
you press C+R, the image will rotate 90°
counter-clockwise.
Rotating an already placed part
1 Select the part.
2 Press C+R to rotate it 90° counter-clockwise.
Rotating an area of the schematic
1 Drag the pointer to select and outline the area to be
rotated.
2 Press C+R to rotate the area.
The selected area rotates 90° counter-clockwise about
the center point of the selected area.
R1
1K
Default
Rotated once
R1
1K
Rotating a Part