Installation Guide

www.erico.com
5
CADDY
®
SUPERFIX 454
The CADDY
®
SUPERFIX 454 pipe clamps feature a patented
closing mechanism to allow easy installation and eliminate
the need to disassemble the clamp prior to installation. An
integrated EPDM 45° A shore rubber gasket helps eliminate
vibration and rattling, meets the requirements of DIN 4109
and is temperature rated from -58°F to 230°F. An electro-
galvanized zinc layer protects the clamps against corrosion.
Use C-FIX snap-in hammerhead bolts for connection.
The CADDY SUPERFIX 454 is an easy-to-close one-screw pipe
clamp that works on steel and copper pipes from IP 1/4 inch,
CT 3/8 to 2 inches. It uses a 3/8 inch nut for connection, which
is specially designed to mount the pipe as close as possible to
the TSGB.
Description
Packing
Unit
454001 CADDY SUPERFIX 454 3/8” 1/4” IP - 3/8” CT 150
454002 CADDY SUPERFIX 454 3/8” 3/8” IP - 1/2” CT 150
454003 CADDY SUPERFIX 454 3/8” 5/8” CT 100
454004 CADDY SUPERFIX 454 3/8” 1/2” IP - 3/4” CT 100
454005 CADDY SUPERFIX 454 3/8” 3/4” IP - 1” CT 100
454006 CADDY SUPERFIX 454 3/8” 1” IP - 1-1/4” CT 50
454007 CADDY SUPERFIX 454 3/8” 1-1/4” IP - 1-1/2” CT 50
454008 CADDY SUPERFIX 454 3/8” 1-1/2” IP 50
454009 CADDY SUPERFIX 454 3/8” 2” CT 50
454010 CADDY SUPERFIX 454 3/8” 2” IP 50
Insert the channel nut into the
channel and turn the washer 90°
clockwise.
Slide the C-FIX to the correct posi-
tion and tighten the hex nut with
a wrench.
Apply the pipe clamp by turning
clockwise at least 2-1/2 turns; do
not turn counterclockwise to adjust
the angle.
Insert the pipe and close the
pipe clamp.
Installation Instructions:
4
1
2
3