Installation manual

GE Security

LOCATION 80 - RECENT CLOSING AND EXIT ERROR COMMUNICATOR CODE, SLOW SPEED

FORMATS ONLY (2 segments, numerical data)

Location 80 contains the tens digit for a 4+2 and 3+1 format that will be sent if “Recent

Closing” and/or “Exit Error Reporting” are enabled. Segment 1 contains the tens digit for

the “Recent Closing Reporting”. Segment 2 contains the digit for the “Exit Error

Reporting”. As ones digit, the user number (1-8) of the user who closed, will be sent.

If you need to report recent closings and exit errors with a unique code per user, Contact

ID or SIA format must be used.

LOCATION 81 - START PROGRAM AND END PROGRAM COMMUNICATOR CODES, SLOW SPEED

FORMATS ONLY (4 segments, numerical data)

Location 81 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“Start / End Programming Reporting” is enabled. Segment 1 contains the tens digit of the

“Start Program Reporting”. Segment 2 contains the ones digit of the “Start Program

Reporting”. Segment 3 contains the tens digit of the “End Program Reporting”. Segment 4

contains the ones digit of the “End Program Reporting”.

For a 3+1 format, only the segment 1 digit resp. segment 3 digit (tens) will be sent.

LOCATION 82 - END DOWNLOAD COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (4

segments, numerical data)

Location 82 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“End Downloading Reporting” is enabled. Segment 1 and 2 are reserved. Segment 3

contains the tens digit of the “End Download Reporting”. Segment 4 contains the ones

digit of the “End Download Reporting”. Note: A start download report will be sent to the

internal event log.

For a 3+1 format, only the segment 1 digit (tens) will be sent.

LOCATION 83 - CANCEL COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (1 segments,

numerical data)

Location 83 contains the tens digit for a 4+2 and 3+1format that will be sent if “Cancel

Reporting” is enabled. Segment 1 contains the tens digit for the “Cancel Communicator

Reporting”. As ones digit, the user number (1-8) of the user who cancelled, will be sent.

If you need to report cancels with a unique code per user, Contact ID or SIA format must

be used.

LOCATIONS 84-109 - RESERVED

NX-4-EUR Installation manual Page 59 08/09/04