Installation manual

GE Security
g
LOCATION 69 - LOW BATTERY / LOW BATTERY RESTORE COMMUNICATOR CODES, SLOW SPEED
FORMATS ONLY (4 segments, numerical data)
Location 69 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if
“Low Battery Reporting” is enabled. Segment 1 contains the tens digit of the “Low Battery
Reporting”. Segment 2 contains the ones digit of the “Low Battery Reporting”. Segment 3
contains the tens digit of the “Low Battery Restore”. Segment 4 contains the ones digit of
the “Low Battery Restore”.
For a 3+1 format, only the segment 1 digit resp. segment 3 digit (tens) will be sent.
LOCATION 70 - AUX POWER OVERCURRENT/ AUX POWER OVERCURRENT RESTORE
COMMUNICATOR CODES, SLOW SPEED FORMATS ONLY (4 segments, numerical data)
Location 70 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if
“Aux Power Overcurrent Reporting” is enabled. Segment 1 contains the tens digit of the
“Aux Power Overcurrent Reporting”. Segment 2 contains the ones digit of the “Aux Power
Overcurrent Reporting”. Segment 3 contains the tens digit of the “Aux Power Overcurrent
Restore”. Segment 4 contains the ones digit of the “Aux Power Overcurrent Restore”.
For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.
LOCATION 71 - BELL TAMPER AND BELL TAMPER RESTORE COMMUNICATOR CODES, SLOW
SPEED FORMATS ONLY (4 segments, numerical data)
Location 71 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if
siren supervision reporting is enabled. Segment 1 contains the tens digit of the “Bell
Tamper Reporting”. Segment 2 contains the ones digit of the “Bell Tamper Reporting”.
Segment 3 contains the tens digit of the “Bell Tamper Restore”. Segment 4 contains the
ones digit of the “Bell Tamper Restore”.
For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.
LOCATION 72-73 - Reserved
LOCATION 74 - EXPANDER TROUBLE AND EXPANDER TROUBLE RESTORE COMMUNICATOR
CODES, SLOW SPEED FORMATS ONLY (4 segments, numerical data)
Location 74 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if
“Expander Trouble Reporting” is enabled. Segment 1 contains the tens digit of the
“Expander Trouble Reporting”. Segment 2 contains the ones digit of the “Expander
Trouble Reporting”. Segment 3 contains the tens digit of the “Expander Trouble Restore”.
Segment 4 contains the ones digit of the “Expander Trouble Restore”. For a 3+1 format,
only the segment 1 digit resp. segment 3 digit (tens) will be sent.
LOCATION 75 - FAIL TO COMMUNICATE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2
segments, numerical data)
Location 75 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if
the “Fail To Communicate Reporting” is enabled. Segment 1 contains the tens digit, and
segment 2 contains the ones digit.
For a 3+1 format, only the segment 1 digit (tens) will be sent.
NX-4-EUR Installation manual Page 57 08/09/04