Installation manual

GE Security

LOCATION 64 - KEYPAD AUXILIARY 2 COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2

segments, numerical data)

Location 64 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the keypad “Auxiliary 2” (MEDICAL) is enabled in the partition feature selection. Segment

1 contains the tens digit; segment 2 contains the ones digit.

For a 3+1 format, only the segment 1 digit (tens) will be sent.

LOCATION 65 - KEYPAD PANIC COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2

segments, numerical data)

Location 65 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the keypad “Panic” is enabled in the partition feature selection. Segment 1 contains the

tens digit, and segment 2 contains the ones digit.

For a 3+1 format, only the segment 1 digit (tens) will be sent.

LOCATION 66 - KEYPAD MULTIPLE CODE ENTRY TAMPER COMMUNICATOR CODE, SLOW SPEED

FORMATS ONLY (2 segments, numerical data)

Location 66 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the keypad “Multiple Code Entry” (Tamper) is enabled in the partition feature selection.

Segment 1 contains the tens digit, and segment 2 contains the ones digit.

For a 3+1 format, only the segment 1 digit (tens) will be sent.

LOCATION 67 - BOX TAMPER / BOX TAMPER RESTORE COMMUNICATOR CODE, SLOW SPEED

FORMATS ONLY (4 segments, numerical data)

Location 67 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the “Box Tamper” feature is enabled in location 37. Segment 1 contains the tens digit of

the “Box Tamper”. Segment 2 contains the ones digit of the “Box Tamper”. Segment 3

contains the tens digit of the “Box Tamper Restore”. Segment 4 contains the ones digit of

the “Box Tamper Restore”.

For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.

LOCATION 68 - AC FAIL / AC FAIL RESTORE COMMUNICATOR CODES, SLOW SPEED FORMATS

ONLY (4 segments, numerical data)

Location 68 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“AC Fail Reporting” is enabled. Segment 1 contains the tens digit of the “AC Fail

Reporting”. Segment 2 contains the ones digit of the “AC Fail Reporting”. Segment 3

contains the tens digit of the “AC Fail Restore”. Segment 4 contains the ones digit of the

“AC Fail Restore”.

For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.

NX-4-EUR Installation manual Page 56 08/09/04