Installation manual

GE Security
g
LOCATION 54 - DAYS OF THE WEEK “ARM ONLY AFTER CLOSE WINDOW” CODES (1 Segment,
feature selection data)
Location 54 selects the days of the week the system is open. On these days, “arm only
after close window” codes will be able to arm and disarm during “open window”. On days
not selected here, “arm only after close window” codes will not be able to disarm.
Note: If the system programmed to auto-arm (location 55), the NX-4 will try to arm every
45 minutes for the duration of the close period.
On days not selected here, “arm only after close window” codes will not disarm.
Segment 1
1 = “Arm only after close window” will arm/disarm on Sunday
2 = “Arm only after close window” will arm/disarm on Monday
3 = “Arm only after close window” will arm/disarm on Tuesday
4 = “Arm only after close window” will arm/disarm on Wednesday
5 = “Arm only after close window” will arm/disarm on Thursday
6 = “Arm only after close window” will arm/disarm on Friday
7 = “Arm only after close window” will arm/disarm on Saturday
8 = Reserved
LOCATION 55 - DAYS OF THE WEEK FOR AUTO ARMING (1 Segment, feature selection data)
Location 55 selects the days on which the system will auto-arm. If a zone is faulted before
the warning timer and stays faulted during the warning timer, the zone will automatically
be bypassed. If the zone restores, it will be unbypassed and active in the system.
Segment 1
1 = Auto arming on Sunday
2 = Auto arming on Monday
3 = Auto arming on Tuesday
4 = Auto arming on Wednesday
5 = Auto arming on Thursday
6 = Auto arming on Friday
7 = Auto arming on Saturday
8 = Disable retry timer
NX-4-EUR Installation manual Page 53 08/09/04