Installation manual

GE Security
g
CHARACTER DATA: Character data is used to enter LCD text when programming (see
[*]-[9]-[2] feature for custom messages). Custom zone descriptions and messages are
stored using character or ASCII data types. This information is programmed using the
bottom line of the display as a text editor. Once a character location has been entered,
the current data will be displayed on the bottom line. As always, the top line will display
the current location and segment number. The five (5) function keys, as well as the ‘up’
and ‘down’ arrows to the right of the display, are now used to edit the message before
saving it back to the location storage. An underscore (_) in the display indicates the
current cursor location. To move the cursor to the right, press the [*] key. To move the
cursor to the left, press the [Cancel] key. To change the character at the current cursor
location, press the Up or Down Arrow until the desired character is displayed. To accept
this character, press the [*] key. The character will remain, and the cursor will advance
one space to the right.
You can also immediately select a character from the underlying table. By doing this you
can quickly form a word without having to scroll down all characters in the list
Follow the procedure below to select a character:
Step 1
Enter the double figured number of the wanted character of the table
below.
Step 2 Confirm the character by pressing the [*] key.
Step 3 Repeat steps 1 and 2 until the complete word is formed.
Step 4 Confirm the word by pressing the [#] key.
Key Function
[Stay]
Inserting spaces
[Chime]
Deleting characters
[Exit]
Access the library
[Bypass]
Make a character or entire word flashing
[Cancel]
Backspace
[*]
Confirm the word or character being displayed
[#]
Finished editing the line
NX-148 LIBRARY
ALARM DURESS INSTANT PIR STORAGE
AREA EAST INTERIOR PORCH STUDY
AUDIO EMERGENCY JUNK ROOM TAMPER
BACK EXIT KITCHEN RUMPUS TELEVISION
BATHROOM EXTERIOR LIBRARY SAFE TROUBLE
BEAM FIRE LIGHT SENSOR TV
BEDROOM FRONT LIVING SHOCK UP
BUTTON GAME MASTER SHOP UTILITY
CEILING GARAGE MICROWAVE SIDE VAULT
CLOSET GLASSBREAK MOTION SKYLIGHT WAREHOUSE
DELAY GUEST NORTH SLIDING WEST
DEN HALL NURSERY SMALL WINDOW
DETECTOR HEAT OFFICE SMOKE WING
DINING HOLDUP PANIC SOUND WIRELESS
DOOR HOUSE PANTRY SOUTH YARD
DOWN INFRARED PHONE STAIRS ZONE
NX-4-EUR Installation manual Page 29 08/09/04