Installation manual

Page 43
LOC PG DESCRIPTION DEFAULT DATA
GO TO PROGRAM CODE PARTITION AND AUTHORIZATION
Segment #1 (Circle numbers to program)
1
2
3
4
5
6
7
8
Reserved.
Enables "Go To Program Code" as an arm only code.
Enables "Go To Program Code" as an arm only after closing.
Enables "Go To Program Code" as a master arm/disarm code (can change user codes)
Enables "Go To Program Code" as an arm/disarm code.
Enables "Go To Program Code" to bypass zones.
Enables "Go To Program Code" opening and closing reports.
Reserved.
Segment #2 (Circle numbers to program)
43 22
1
2
3
4
5
6
7
8
Enables "Go To Program Code" for partition #1.
Enables "Go To Program Code" for partition #2.
Enables "Go To Program Code" for partition #3.
Enables "Go To Program Code" for partition #4.
Enables "Go To Program Code" for partition #5.
Enables "Go To Program Code" for partition #6.
Enables "Go To Program Code" for partition #7.
Enables "Go To Program Code" for partition #8.
L
44 23 DURESS CODE 15-15-15-15-15-15 ______
AUXILIARY OUTPUTS 1-4 PARTITION SELECTION
Segments 1 2 3 4
45 23
Partition #1
Partition #2
Partition #3
Partition #4
Partition #5
Partition #6
Partition #7
Partition #8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
46 23 AUXILIARY OUTPUTS 1-4 SPECIAL TIMING
Segments 1 2 3 4
Auxiliary output timed in minutes.
Auxiliary output to latch.
Auxiliary output to stop timing upon user code entry.
Auxiliary output to activate only between closing and opening time.
Auxiliary output to activate only between opening and closing time.
Invert auxiliary output ( 0 volts going to 12 volts when activated).
Reserved
Reserved
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
AUXILIARY OUTPUT #1, EVENT & TIME
Segment #1: Program the event number for output #1 here. 0=Burglary alarm
47 23
Segment #2: Program the timing for output #1 here . 10 seconds
AUXILIARY OUTPUT #2, EVENT & TIME
Segment #1: Program the event number for output #2 here. 1=Fire alarm
48 23
Segment #2: Program the timing for output #2 here . 10 seconds
AUXILIARY OUTPUT #3, EVENT & TIME
Segment #1: Program the event number for output #3 here. 2= 24 Hour Alarm
49 23
Segment #2: Program the timing for output #3 here . 10 seconds
AUXILIARY OUTPUT #4, EVENT & TIME
Segment #1: Program the event number for output #4 here. 21-Armed State
50 23
Segment #2: Program the timing for output #4 here . 0=Follow condition