User Guide

SETTING THE SYSTEM DATE

Step 1 Press the [U]-[9]-[6].

Step 2 Enter the “Master Code”.

Step 3 Enter the “Day of Week “

1 = Sunday 3 = Tuesday 5 = Thursday 7 = Saturday

2 = Monday 4 = Wednesday 6 = Friday

Step 4 Enter the “Month Code”. Must always be two (2) digits.

01 = January 05 = May 09 = September

02 = February 06 = June 10 = October

03 = March 07 = July 11 = November

04 = April 08 = August 12 = December

Step 5 Enter the “Day Code”. Must always be two (2) digits.

Example: The 5

would be entered as [0]–[5].

Step 6 Enter the last two digits of the “Year Code”.

Example: For 1997 enter [9]–[7].

SETTING THE SYSTEM CLOCK

Step 1 Press [U]-[9]-[7].

Step 2 Enter the “Master Code “.

Step 3 Enter the “hour code” which must be two (2) digits. Note: The clock

is a 24-hour clock. Refer to the following table.

Step 4 Enter the “minutes code” which must be two (2) digits.

Example: 7 minutes after would be entered [0]–[7].

Time Hour Code Time Hour Code Time Hour Code

12:00

Midni

00 8:00 AM 08 4:00 PM 16

1:00 AM 01 9:00 AM 09 5:00 PM 17

2:00 AM 02 10:00 AM 10 6:00 PM 18

3:00 AM 03 11:00 AM 11 7:00 PM 19

4:00 AM 04

12:00

Noon

12 8:00 PM 20

5:00 AM 05 1:00 PM 13 9:00 PM 21

6:00 AM 06 2:00 PM 14 10:00 PM 22

7:00 AM 07 3:00 PM 15 11:00 PM 23