User Manual

The ovens show alarm/warning messages relative to the oven or installed accessories (only LED version) on the screen.
The warning messages (WARNING) signal malfunctions that nevertheless allow the appliance and accesso- ries to operate, though
with a restricted set of functions.
The alarm messages (ALARM) identify situations that fail to allow any appliance/accessories operation whatsoever, and therefore must
be put into STOP mode.
If the alarm messages strictly refer to the connected accessories, the oven can still be used.
ALARMS
Display Description Effect Solution
A01 Motor thermal alarm
The oven stops any operating cycle
and blocks any screen display
configuration
Contact the Customer
Assistance Service
A02 Safety thermostat alarm
A03 Oven cavity alarm
A04
Hood communications failure
alarm
A07 Prover cavity probe alarm
The prover stops any operating
cycle and stops any successive
display screen settings
Check the power cord of the
appliance, if the problem persists
even after the corrective action,
contact the customer assistance
service
A08
Presence of prover power
alarm
A09 Prover communication alarm
WARNING
Display Description Effect Solution
U01
Warning: oven temperature board
The appliance continues to
operate, but some functions may
be disabled
Contact the Customer
Assistance Service
U07
Warning prover temperature
board
U13
Warning: hood temperature
board
U14
Warning: hood temperature
board probe
U15 AC power missing
U16 Communication error
15
BAKERLUX SHOP.Pro™
Alarms