User Manual

Your BAKERLUX SHOP.Pro™ LED version appliance can control a prover of the same series, connected thereto.

SELECT THE APPLIANCE

Select the "

PROVER" button: the control pan- el is now

enabled to use this appliance.

SETTING LEAVENING PARAMETERS

Select the "

CLOCK" button to set the leaven- ing

cycle time.

Set the desired value in hours.minutes (the example

shows 5 hours and 30 minutes).

Select the "

TEMPERATURE" button to set the

leavening temperature.

Set the desired value in °C (the example shows:

50°C).

START LEAVENING

Press the "

START/STOP" button: leavening will start

with the set parameters.

STEAM INPUT

If steam is needed during the leavening pro- cess in

progress, press the "

STEAM" button: steam is injected

until the button is released.

BAKERLUX SHOP.Pro™

Using the prover (only the LED version)