User's Manual

3
6
Bodypack TXBPDW Transmitter
1. Power/Mute switch
2. TB3M-type connector receives
TA3F-type terminated connection
3. Battery compartment
4. Antenna
5. LED indicator light
Operating Instructions
• Insert new high quality alkaline batteries into your transmitter.
• Utilize the exible output format of the receiver to match your
application. Connect to mixer or amplier appropriately.
• Power up the receiver.
• Power up the transmitters.
• The RF indicator light will show connectivity between the receiver
and the transmitter. The AF indicator light shows the presence of
an audio source.
4
5
3
21
Channelization
The PDW system is available in the following frequencies:
AA = 902.9MHz / 915.5MHz
AB = 909.3MHz / 926.8MHz