Precautions PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual In a safe pace for future reference WARNING A Ways follow the bask precautions listed below to avoid the possibility of serous Injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Do not open + This device contains no user-serviceable parts.
NOTICE To avoid the possibility of malfunction gendarme to the product, damage to date, or damage t other property, follow the notices below. Unending and maintenance «Do not use the devices in the vicinity of a TV, radio, stereo equipment, movie pane, or offer geriatric devices. Otherwise, the device, TV, or radio may generates noise.
Computer Connection Settings: 2. Playback Settings Find the local device as shown in the figure below, and Drive-Free Installation on Mac®, Windows7® set the sampling rate and bit width of the volume mixer to 16bit/48kHz. Improper ’ setting will lead fo abnormal operation of the sound card. Monitor Settings As shown in the figure below, turn off the rectum listening the computer volume mixer, otherwise the sound will be repeated and esd fe mama seriously distorted.
Controls and Functions Minnelli Mono input jack, you can connect XLR plug or phone plug to connect the microphone or instrument you want to use. Main Output TRS phone types unbalanced output jack for mixed stereo signal. The signal level can be adjusted through the [MAIN] knob. For example, these jacks can be used to connect the power amplifier of the main speaker. 48V Phantom Switch J off / = on, for using condenser microphones requiring phantom power. Notice: 4.
make the [PEAK] indicator light flash briefly for the best recording level. [81G] Indicator Light Shows presence of signal. [ST PAN] Mono/Stereo Switch When channel! 1 or 2 are independent signals, switch to mono (lL). When stereo signal is applied, switch to stereo Channel 1 volume knob controls the level of left channel and channel 2 volume knob controls the level of right channel. [LEVEL] Channel volume control knob, which can control the channel level and send it to [MAIN] mixed output.
Troubleshooting The power Indicator Is not on? Confirm whether the correct USB cable is used, and be sure to use the included USB cable. Check whether the USB connector is firmly connected. Confirm whether the USB power supply is normal. Confirm whether the correct USB cable is used, and be sure to use the included USB cable. Check whether the computer's volume controller is set to the correct level. Confirm whether [MAIN] volume knob and [PHONES] volume knob are up.
audio CAD Audio 6573 Cochran Rd., Bldg. I Solon, OH 44139 U.S.A. Tel: (440) 349-4900 Fax: (440) 245-4904 Sales: 800-762-9286 audiological Distributed Worldwide by American Music and Sound 925 Broad beck Drive, Suite 220 New bury Park, CA 91320 U.S.A.
