Owner's Manual

Owner’s Manual

Part number 47830-59-00

Dec 2020

GXLD2QM

1. ON/OFF Switch

2. Antenna

3. Charge indicator, Red charging, Green charged

4. DC 5V charging port

1. ON/OFF switch

2. Frequency Selection Button

3. Frequency Display

4. Battery Compartment

Digital Frequency Agile Dual Channel Wireless Microphone System

The GXLD2QM™ Digital frequency agile wireless system includes the following features:

GXLD2QM Wireless Specifications:

Frequency Response 20Hz – 20kHz

Modulation High Definition Digital QPSK

Transmitting Power 10mW

Sensitivity - 43 dBV (6.8mV) @ 1Pa

Battery Life >10Hrs

Frequency Band 500Mhz – 599Mhz

Receiver

Transmitter

• Digital High Definition Audio

• Frequency Agile Design

• Dual Handheld System

• QuickMic™ connection to your mixing board via integrated ¼” jack

• QuickMic™ is supplied with USB and TRS 3.5mm adapters for added flexibility

• Handheld transmitters feature the CADLive Style Neodymium capsules

• Handheld transmitters and receiver feature low battery indicators

• Handheld transmitters utilize AA Batteries with > 8 Hrs of operati

• 2 Year Warranty

5. Low battery indicator, Blue on, Red needs charged

Power

USB 5V

6. RF indicator, Red Ch A, Green Ch B

Adapters

USB adapter

3.5mm TRS adapter

PAGE 1
Owner’s Manual GXLD2QM Digital Frequency Agile Dual Channel Wireless Microphone System The GXLD2QM™ Digital frequency agile wireless system includes the following features: • • • • • • • • • Digital High Definition Audio Frequency Agile Design Dual Handheld System QuickMic™ connection to your mixing board via integrated ¼” jack QuickMic™ is supplied with USB and TRS 3.
PAGE 2
Owner’s Manual GXLD2QM How to use the GXLD2QM system: 1. Turn the receiver ON/OFF switch to ON, the LED indicator will illuminate, insert the 1/4” (6.3mm) input jack into the audio input jack of your audio mixer. 2. Insert (2) AA batteries into the battery compartment of the transmitter, make sure the polarity is correct. 3. Turn the transmitter on, the frequency display will illuminate, you can now use this system. 4.
PAGE 3
GXLD2QM Owner’s Manual Individuals with cardiac pacemakers and other similar medical devices should consult with their physician before using any RF devices. Though the output level of this wireless system is below 50 milliwatts, the proximity of the transmitter to the implant device could pose a threat. As with any wireless product, environmental conditions can reduce or in some cases prohibit a successful connection between the transmitter and the receiver.