User Manual

70
the LCD display will return to the main
screen after 3 seconds.
To perform a f irmware update when available:
1. Switch off the V6 and remove the
batteries inside.
2. Connect it with a computer via the Cactus
m i n i-U S B c a ble M U -1 (o ptio n a l).
3. Press and hold , then switch on the V6
in TX or RX mode at the same time.
4. The V6 is now in f irmware update mode.
The status LED blinks in red rapidly. The
f irmware update program will then
recognize the connected V6 and start the
upgrade.
Note: Firmware updates will erase ALL
custom ash prof iles you have saved in the
V6.
Please visit w w w.cactu s-ima g e.co m/v6.html
for more information.
Firmware updates only work on Microsoft
Windows platform. Mac OS is not supported.