User Manual

You may also adjust the power level of the

master ash that you have mounted on the V6

T X m u lt i- s y s t e m s h o e (fe m a l e).

1. Make sure that the TTL pass-through mode

h a s n o t b e e n a c tiv a t e d (s e e S e c t i o n 8).

2. Press and turn the selection dial

simultaneously to change the power level

of the master ash.

12.1.2 Multi-Group Power Adjustment

To adjust the power level of ALL active

groups, simply turn the selection dial left

or right to the desired power level.

Note: The power level of the master ash is

not affected by the multi-group adjustment.

12.1.3 Quick Power Adjustment Mode

By turning the dial left or right one

“click,” the power level of the chosen

groups will increase or decrease by one

step. The EV step in the V6 factory setting

is 1/3 EV. The EV step can be conf igured to

1/2, 1/3, o r 1 /10 i n t h e <E V S T E P > m e n u (s e e